產品列表PRODUCTS LIST
二氧化硫SO2氣體檢測管式檢測儀103SD SULPHUR DIOXIDE 1-60ppm,氣體檢測管是利用填充在玻璃管中的檢測劑與被測氣體發生化學反應而發生顏色變化,通過觀察變色層的長度,得到被測氣體的濃度。在一定直徑的玻璃管內緊密地裝填檢測劑,將兩端燒封,然后在玻璃管表面印制表示濃度的刻度,就制成了一支檢測管。檢測劑通過在硅膠或氧化鋁等物質表面附著顯色試劑的方法所制成的。顯色試劑遇到被測氣體時,會發生特定反應,產生變色,這種檢測試劑具有相當?shù)姆€(wěn)定性。
更新時間:2024-11-20
在線留言二氧化硫SO2氣體檢測管式檢測儀103SD SULPHUR DIOXIDE 1-60ppm
Tube 03SD
1. PERFORMANCE
1) Measuring range :1-60 ppm
Number of pump strokes 1(100ml)
2) Sampling time :1 minute/1 pump stroke
3) Detectable limit :0.5 ppm
4) Shelf life :3 years
5) Operating temperature :0~40℃
6) Reading :Direct reading from the scale calibrated by 1 pump stroke
7) Colour change :Pink→Yellow
2. RELATIVE STANDARD DEVIATION
RSD-low:10% RSD-mid.:5% RSD-high:5%
3. CHEMICAL REACTION
By reacting with alkali, PH indicator is discoloured.
SO2+2NaOH→Na2SO3+H2O
4. CALIBRATION OF THE TUBE
PERMEATION TUBE METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
60
50
40
30
20
10
5
1
ppm
SO2
GAS To pump
103SD SULPHUR DIOXIDE
Substance ppm Interference ppm Coexistence
Chlorine Pale pink stain is produced. SO2 ×c2onc. Higher readings are given.
SO2 conc. The top of discoloured layer
Nitrogen dioxide 20 〃×1 becomes un clear and higher
readings are given.
上一篇:103SC二氧化硫SO2氣體測毒管103SC SULPHUR DIOXIDE 20-300ppm
下一篇:103SDKITAGAWA二氧化硫SO2氣體檢測管式檢測儀 SULPHUR DIOXIDE 1-60ppm
返回列表>>相關產品